Rail Power RP20CH |
 |
| Data Sheet Information Compiled by: Jean-Denis Bachand |
| New: 30 March 2008 |
Artwork by: Jean-Denis Bachand |
| - |
| Engine Builder: Deutz |
Engine: TSG-2015 (3) V-8 |
| Cycle: 4 |
4 EPA Tier 2 |
| RPM Max/Min: |
2100/1500 |
| Number of Engines: 3 |
Total Horsepower: 2000 |
| Main Generator: NEWAGE |
Model: - |
| Gear Ratio: 62:15 |
Speed: 60 mph |
| Trucks: 6-Wheel |
Configuration: C-C |
| Traction Motor Blowers: Delco (4) |
Model: Electrical Drive |
| Weight: 392,000 lbs |
Traction Motors: GM D77/78 (6) |
| Accumulators: 4 sets VRLA Batteries |
Rating: 700 VDC Nominak 1200 amp |
| Tractive Effort (starting) 80,000 lbs @ 25.5% |
Tractive Effort (continuous): 49,300 lbs @ 12.8mph |
| Multiple Unit Capability: No |
Dynamic Braking: No |
| Auxilary Generator: 200/500kW |
Alternator: N/A |
| Air Brake: Westinghouse |
Model: 26L |
| Quantity Built: 1
|
Dates: 12/2007 to 3/2008 |
| - |
- |
| Exterior Dimensions
| RP 20CH |
| Total Length |
67'-03" |
| Wheel Diameter |
40" |
| Truck Wheel Base |
13'-09" |
| Height to Top Hood |
15'-02.5" |
| Height to Top Cab |
15'-04.5" |
| Cab Width |
10'-03.5" |
| Hood Width |
8'-10" (06'-011.5") |
| Height of Walkway |
9'-01.5" |
| Walkway Width |
5'-00" |
| Center Bolster |
41'-11" |
| Center Front Truck to Front Pilot |
1'-07.5" |
| Center Rear Truck to Rear Pilot |
1'-07.5" |
| Distance between Truck Centers |
54'-06" |
| Minimum Turning Radious |
30 degrees |
| -
| - |
| Fuel Oil: 3000
| Lubricating Oil: 23.5 |
| Engine Cooling Water: 37
| Sand Capacity: 24 cu. ft. |
Options:
- Microprocessor Control System
- IGBT Power Electronics
- Individual Motor Cut-out
|
| - |
- Locomotive 2007, Trains January 2007
- Locomotive 2006, Trains January 2006
- Trains, August 2006
- Rail Power Technical Data
|